ORNAMENTAL FISH FEEDER TOOL IN THE AQUARIUM AUTOMATICALLY

Driyanto Driyanto, Adi Sucipto, Yuri Rahmanto

Abstract


The purpose of making the Ornamental Fish Feeder Application Automatically is to facilitate in feeding, so that when the fish keeper has a busy schedule that is quite dense and finds it difficult when going to leave the house for a long time, then the fish will be maintained in the feeding process. The designed system consists of four parts: power supply, minimum system, mechanical circuit and program. The power supply is a power source to run the entire system consisting of voltage, the minimum system in the form of electronic circuits designed in such a way that it can function as a data processor with a microcontroller as a control center, mechanics serve as a dc motor drive to provide fish feed and then a program that serves to regulate the microcontroller so that it can work in accordance with the features offered. The way this tool works is by regulating feeding on fish feeders regulated by microcontrollers using RTC (Real Time Clock) time parameters, arduino as a process, DC motor (Direct Current) as output condition and LCD (Liquid Crystal Display) as user interface and monitoring. The addition of ultrasonic sensors to monitor the state of feed in the container. Based on the results of testing and for the work of the Ornamental Fish Feeder Tool in the Aquarium Automatically has shown results in accordance with the planning, namely the tool can provide fish feed automatically at a predetermined time.

Full Text:

PDF

References


I. Kurniawan, Setiawansyah, and Nuralia, “PEMANFAATAN TEKNOLOGI AUGMENTED REALITY UNTUK PENGENALAN PAHLAWAN INDONESIA DENGAN MARKER,” J. Inform. dan Rekayasa Perangkat Lunak, vol. 1, no. 1, pp. 9–16, 2020.

D. A. Megawaty, Setiawansyah, M. Bakri, and E. Damayanti, “SISTEM MONITORING KEGIATAN AKADEMIK SISWA,” vol. 14, no. 2, pp. 98–101, 2020.

S. Ahdan and S. Setiawansyah, “Pengembangan Sistem Informasi Geografis Untuk Pendonor Darah Tetap di Bandar Lampung dengan Algoritma Dijkstra berbasis Android,” J. Sains dan Inform. Res. Sci. Inform., vol. 6, no. 2, pp. 67–77, 2020.

S. Setiawansyah, Q. J. Adrian, and R. N. Devija, “Penerapan Sistem Informasi Administrasi Perpustakaan Menggunakan Model Desain User Experience,” J. Manaj. Inform., vol. 11, no. 1, pp. 24–36, 2021.

H. Sulistiani, A. Yuliani, and F. Hamidy, “Perancangan Sistem Informasi Akuntansi Upah Lembur Karyawan Menggunakan Extreme Programming,” Technomedia J., vol. 6, no. 01 Agustus, 2021.

K. Pindrayana, R. I. Borman, B. Prasetyo, and S. Samsugi, “Prototipe Pemandu Parkir Mobil Dengan Output Suara Manusia Mengunakan Mikrokontroler Arduino Uno,” CIRCUIT J. Ilm. Pendidik. Tek. Elektro, vol. 2, no. 2, 2018.

S. Samsugi and A. Suwantoro, “Pemanfaatan Peltier dan Heater Sebagai Alat Pengontrol Suhu Air Pada Bak Penetasan Telur Ikan Gurame,” in Conf. Inf. Technol, 2018, pp. 295–299.

Y. Rahmanto, A. Rifaini, S. Samsugi, and S. D. Riskiono, “Sistem Monitoring pH Air Pada Aquaponik Menggunakan Mikrokontroler Arduino UNO,” J. Teknol. dan Sist. Tertanam, vol. 1, no. 1, pp. 23–28, 2020.

S. Samsugi, A. Ardiansyah, and D. Kastutara, “Arduino dan Modul Wifi ESP8266 sebagai Media Kendali Jarak Jauh dengan antarmuka Berbasis Android,” J. Teknoinfo, vol. 12, no. 1, pp. 23–27, 2018.

D. A. Dwijaya, “PERANCANGAN APLIKASI UNTUK PELANGGARAN DAN PRESTASI SISWA PADA SMP KARTIKA II-2 BANDAR LAMPUNG,” J. Inform. dan Rekayasa Perangkat Lunak, vol. 1, no. 2, pp. 127–136, 2020.

Y. Rahmanto, S. Hotijah, and Damayanti, “PERANCANGAN SISTEM INFORMASI GEOGRAFIS KEBUDAYAAN LAMPUNG BERBASIS MOBILE,” JDMSI, vol. 1, no. 3, pp. 19–25, 2020.

D. Darwis, A. F. Pasaribu, and A. Surahman, “Sistem Pencarian Lokasi Bengkel Mobil Resmi Menggunakan Teknik Pengolahan Suara dan Pemrosesan Bahasa Alami,” J. Teknoinfo, vol. 13, no. 2, pp. 71–77, 2019.

S. Yana, R. D. Gunawan, and A. Budiman, “SISTEM INFORMASI PELAYANAN DISTRIBUSI KEUANGAN DESA UNTUK PEMBANGUNAN (STUDY KASUS: DUSUN SRIKAYA),” J. Inform. dan Rekayasa Perangkat Lunak, vol. 1, no. 2, pp. 254–263, 2020.

D. P. Tarigan, A. Wantoro, and Setiawansyah, “SISTEM PENDUKUNG KEPUTUSAN PEMBERIAN KREDIT MOBIL DENGAN FUZZY TSUKAMOTO (STUDI KASUS: PT CLIPAN FINANCE),” TELEFORTECH J. Telemat. Inf. Technol., vol. 1, no. 1, 2020.

A. F. O. Pasaribu, D. Darwis, A. Irawan, and A. Surahman, “Sistem Informasi Geografis untuk Pencarian Lokasi Bengkel Mobil di Wilayah Kota Bandar Lampung,” J. Tekno Kompak, vol. 13, no. 2, pp. 1–6, 2019.


Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Jurnal Robotik